User manual

3.4.3 Additional Configuration Options
• Administering the camera: You can modify the camera configuration in the
Administration menu (Admin Menu button) or the Setup menu (Setup Menu
button).
• Admin Menu: This menu contains the basic configuration dialogs of the
camera (e.g. passwords, interfaces, software update).
• Setup Menu: This menu contains the dialogs for configuring the image,
event and recording parameters. Some of these settings can be changed
using the corresponding Quick Controls in the Live screen.
• Resetting changes: If you would like to reset changes in one dialog without
resetting the complete configuration, you can use the Factory button at the
bottom of the dialog to reset only this dialog's settings to the factory defaults.
If you would like to reset all image settings, you can do so using the Manage
Settings> Restore Image Settings Quick Control above the image on the Live
screen.
• Storing the configuration permanently: Once you have finished configuring
the camera, you should always store the settings in the camera's perma-
nent memory. You can do so in each dialog (clicking on Set at the bottom of
each dialog will temporarily set the changes; clicking on Close will ask you to
store the complete configuration in the cameras permanent memory) or in
the Configuration section of the administration menu (Admin Menu> Store
current configuration into flash memory). The Configuration section of the
administration menu provides more functions for storing, copying and man-
aging camera settings. For additional information on this topic, see chap-
ter5,
Basic Camera Configuration , in the Software Manual .
• Time tasks and time synchronization: Apart from a multitude of possibilities
for controlling the camera using time (time tables, holiday and vacation,
scheduled tasks, etc.), the camera can also synchronize its internal clock.
This allows you to keep the camera in synch manually with a computer or
fully automatic using a time server or another MOBOTIX camera. The camera
can use either NTP time servers or Time Protocol servers. For additional infor-
mation on this topic, see section 5.4.2,
Date and Time / Time Zones and Time
Servers
, in the Software Manual .
• The "More" and "Less" buttons: When opening some of the camera dia-
logs, the camera only shows the most important parameters. These dialogs
have a More button in the bottom right corner; click on it to display addi-
tional options. If all options are displayed, click on the Less button to hide the
additional options.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
110/132
D12 Camera Manual Part 1
Admin Menu
User: admin
Password: meinsm
Make sure to permanently
store changed parame-
ters!
Automatic time synchroni-
zation using a time server
More: Display advanced
features
Less: Hide advanced fea-
tures