User manual

If the SD card's contents are encrypted, you need to enter the corresponding pass-
word in the "new" camera in the Admin Menu> Storage on External File
Server/ Flash Device dialog. Otherwise, the camera cannot access the SD card.
3.5.6 Deactivating SD Card Recording and Removing the Card
Follow these steps to deactivate the recording to an SD card (Admin Menu> Stor-
age on External File Server/ Flash Device):
1) Activate the None option.
2) Click on the Set button at the bottom of the dialog, then on Close.
3) Reboot the camera (Admin Menu> Reboot Camera).
4) Once the camera has rebooted, make sure that the camera does not show
the symbol in the bottom right corner of the live image.
5) You can now safely remove the SD card from the camera.
3.5.7 Limitations on Warranty When Using Flash Storage Media
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
118/132
D12 Camera Manual Part 1
Caution
MOBOTIX will not assume any responsibility for Flash storage
devices (e.g. SD cards or connected USB storage devices) deliv-
ered with or integrated in MOBOTIX cameras. The same applies to
damages to Flash storage media not acquired through MOBOTIX
or by the use of such media.
Caution
An SD card may only be removed from the camera after you have
deactivated
Recording to SD Card and rebooted the camera. Fail-
ing to do so may lead to loss of data!
Removing connected storage media from the camera without
properly deactivating them will destroy certain areas of the stor-
age device. When using MxFFS-formatted media, this is limited to
4MB lost data per incident; a FAT storage device may even be
destroyed completely when removing the device without properly
deactivating it first!