User manual

• Make sure that you have properly fastened the three Allen screws

M4x25mm (item4.9).

2.12.5 Connecting the Camera and Mounting the Bottom Plate

• Plug the camera connector cables into the appropriate wall outlets or

adapters.

• Insert the (straight) wall side of the bottom plate into the back of the wall

mount as shown in the figure.

• Push the front of the bottom plate upwards.

• Mount the bottom plate to the wall mount (eight Allen screws M4x10mm;

item4.7) and make sure the screws are all properly fastened.

www.mobotix.com • sales@mobotix.com

65/132

D12 Camera Manual Part 1

Mounting the camera on

the bottom plate

Pushing the bottom plate

into the Outdoor Wall

Mount

Max. torque for all

screws: 4Nm

(2.95lbf ft)

Push into slots!