User manual

2.13.4Mounting the Dome and the Camera's Outer Shell

Once the wall mount and the camera have been mounted, it's time to mount the

dome:

• Take a cotton cloth and mount the dome onto

the camera by turning it in clockwise direc-

tion. This will prevent accidental repositioning

of the lenses through the rest of the mounting

process.

Important: Position the mark of the dome

pointing towards the camera's PIR sensor and

gently seat the dome into the threads. This will

prevent misaligning the threads of the dome!

Note: The camera is delivered with an addi-

tional tinted dome with reduced transparency!

Next, install the camera's outer shell:

• Only mount the outer shell if you have finished setting the lenses' focus and

mounted the camera dome.

• Hold the outer shell so that the round hole of the shell is positioned over the

PIR sensor of the camera. Gently press the shell into the shell's seats in the

camera housing.

www.mobotix.com • sales@mobotix.com

70/132

D12 Camera Manual Part 1

Tighten the dome by turn-

ing clockwise

Align the mark of the

dome with the PIR sensor

The outer shell snaps into

its seats at the camera

housing by pressing gently

down on the ring

Dismount the outer shell

using the supplied custom

tool (see section 2.14,

Dis-

mantling the Camera

Caution

The MOBOTIX D12D-Outdoor is only weatherproof if the camera hous-

ing has been mounted tightly to the bottom plate and both the camera

dome and the outer shell are properly seated.