User manual

(2) Remove the cable cover
Remove the 4mm Allen screws of the cable
cover and remove the cover.
Note: If the cable cover
cannot be removed by
hand, take a screw-
driver to lift it out of its
seat. Insert the screw-
driver into the grooves
shown below and gently lift the cable cover.
(3) Remove the Ethernet and ISDN cables
Remove the cables one by one by gently
pressing down the lock and pulling each ca-
ble out of its socket. Now take the cables out
of the cable guides at the bottom of the hous-
ing and remove them through the appropriate
holes in the housing. Take care to avoid any
damage to the cable guides at the bottom
of the camera housing (see
figure ).
(4) Remove the dome
Take a cotton cloth and remove the transpar-
ent dome by turning it in counter-clockwise
direction.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
72/132
D12 Camera Manual Part 1
Allen wrench is included in
delivery
Dismount the dome by
turning it counter-clock-
wise