User manual
2.15 Mounting the Camera to Different Surfaces
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
74/132
D12 Camera Manual Part 1
Caution: The screws
should be at least 15mm
(5/8in) longer than the
dowels
Max. torque for all
screws: 4Nm
(2.95lbf ft)
Find the folded drilling
template at the end of
the manual!
Caution
Never use screws with countersunk heads to fasten the mount, as
these screws will destroy the mount.
120°
R=75 mm/3 in
120°
120°
Notes
Mounting the camera outdoors:
When using a wall outlet for an outdoor installation, you should use
silicone sealant to prevent water from entering the wall outlet and the
cabling by sealing off the mount's base against the wall.
Wall thickness:
Make sure that the wall is at least five centimeters (2in) thick if you
intend to use the supplied dowels and screws.
Mounting Supply
Item
M.1
Count
3
Part Name
Dowels 10 mm
M.2
M.3
3
3
Stainless steel washers Ø 9mm
Stainless steel wood screws with hex head 8x70mm