User manual

2.15.4 After Mounting the Camera

Controlling the image position and the focus

• Remove the dome using a lint-free cotton cloth or the supplied plastic protec-

tion.

• Loosen the screw in the center of the camera using the supplied Allen

wrench (item1.11) so that you can easily turn and tilt the sensor units.

• Display the camera images on a computer monitor, then turn and tilt the

sensor units until you have found the best position.

• If required, clean the lens' surfaces using a clean, lint-free cotton cloth.

• Check the image focus (tele lens L135 only) and the camera position on the

computer monitor. Please also see section 2.13.2,

Adjusting the Lenses, Vis-

ual Check

• Mount the dome again using a lint-free cotton cloth or the supplied plastic

protection. Make sure that you insert the dome into the housing with the

mark of the dome pointing towards the camera's PIR sensor, in order to pre-

serve the camera's weatherproofness!

www.mobotix.com • sales@mobotix.com

78/132

D12 Camera Manual Part 1