User manual

2.17 Camera Accessories
Power supply (MX-SNT-E/U/GB/J/AUS01-30-RJ)
The MOBOTIX power supply is required if you do not
use a Network Power Rack or Network Power
Box, or a PoE-compatible switch or router.
Network Power Adapter (MX-NPA-3-RJ)
The Network Power Adapter allows injecting the
power supply for the MOBOTIX camera into the net-
work cable. It thus allows using the network cable
for connecting to the camera and for remotely sup-
plying power (up to 100m (300ft)). The Network
Power Adapter is required, if you are using the uni-
versal power supply, and if power is not supplied using a PoE switch/router or a
MOBOTIX Netpower Box/Rack.
Netpower Box for up to 4 Cameras (MX-NPR-4)
The MX-NPR-4 allows supplying power to up to four
MOBOTIX cameras via the network cable. The NPR-4
thus replaces four separate power supplies and four
Network Power Adapters. The Netpower Box deliv-
ery includes a (detachable) clip at the back, which
simply clicks onto DIN rails.
Netpower Rack for 8/20 Cameras (MX-NPR-8/20)
The MX-NPR-8/MX-NPR-20 allow supplying power
to up to 8/20 MOBOTIX cameras, respectively, via
the network cable. These NPRs thus replace 8/20
separate power supplies and the same number of
Network Power Adapters; they are easily mounted
in 19" racks (2 rack units).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
82/132
D12 Camera Manual Part 1
Not required if network
components are used that
support the PoE (Power
over Ethernet) standard
IEEE 802.3af!
Power supply for smaller
systems
Intelligent and robust
power supply thanks to
DIN rail installation
Zero maintenance and du-
rable as these devices do
not require fans
Advantages of MOBOTIX PoE Products
• Zero maintenance and durable without fans.
• Higher reliability of the system as a whole, since standard
switches without PoE can be used (lower risk of failure).
• Easy installation on DIN rails using supplied adapter (
MX-NPR-4 )
or in 19" racks (
MX-NPR-8/20 ).