User manual

3.2.8 ISDN: Directly Supplying Power Using the External Power Supply
1) Connect the ISDN connector of the camera to the S0 bus/NT.
2) Plug the RJ45 connector of the external power supply into an RJ45 extension
cable and plug the extension into the 10BaseT/NET connector of the camera.
3.2.9 Ethernet and ISDN: Power Supply When Using Both
In order to use Ethernet and ISDN simultaneously, plug the Ethernet and ISDN
cables into the corresponding connectors of the camera. Power is supplied only
via the Ethernet cable and the 10BaseT/NET connector of the camera (using
MOBOTIX PoE products or Power over Ethernet according to IEEE 802.af).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
91/132
D12 Camera Manual Part 1
Up to 12 wall outlets,
with up to 8 devices
attached
ISDN is a bus system,
which requires termina-
tion (100Ohms) at both
ends
Ethernet ISDN
Example: German Telecom
RJ45 extension
Max. 10m/30 ft
Max. 120m/
130 yd