Owner's manual

Page 54
MOCET IP3072 Smart Office IP Deskphone User Guide
 No answer
 Busy
For more information on how to setup static call forwarding, please contact your
administrator or service provider support center.
To use dynamic forwarding:
1. When the phone rings with an incoming call, press the “Diversion” soft key
2. Enter a number to forward the incoming call to
3. Press “Dial” soft key to forward the call
3.18 Using Voice Mail
Your voicemail is saved on either your hosted SIP service or on the IP PBX, but you can
access it from the IP3072 using the Message ( ) hot key.
The presence of new voice mail messages is indicated by a flashing message waiting
indicator (MWI) LED on the front of the phone and an icon is shown on LCD.
Note: Voicemail is an optional feature configured on a hosted SIP service or IP PBX and
may not be supported on your particular system. To use voicemail on the IP3072, some
settings need to be configured first. For more information, please contact your
administrator or service provider support center.
To listen to your voice messages:
1. Press the Message ( ) hot key to display the mailbox list
2. Select which SIP line’s mailbox you want to listen to and press “OK”
3. A call will be placed to your voice mail server
4. Follow the interactive voice response (IVR) instructions to retrieve and listen, forward
or delete your messages
3.19 Placing a Speed Dial Call
To configure a speed dial number, please see Section 2.2.5 Speed Dialing Setting.
To make a speed dial call:
1. Pickup the handset, or press a line key, or press the speaker key or press the headset
key