ITEM CODE : SH03-52-110 Assembly Instructions
ATTENTION: Is your product damaged or missing assembly instructions? DO NOT RETURN!!!PLEASE READ THE FOLLOWING!!! For Replacement / Missing Parts: www.modarte.com/parts For Assembly Instructions and Assembly Videos:https://modarte.com/assembly/ All other enquiries, please send email to: operations@modarte.com or 973-264-1228 IF YOU ARE MISSING PARTS, OR PARTS ARRIVED DAMAGED: For fastest service, please contact us and we will mail you replacements parts the next business day.
Approximate time : 30 Minutes Surface should be uniform during assembly process. While door assembly ,ensure gap on all Four sides are equal. Mallet can be used to drive in dowel.
Hardware List PART NAME SIZE QTY A Wooden Dowel 8x40mm 37 Nos B Minifix Twister 6x35mm 23 Nos C Minifix Roster 15x12mm 23 Nos D Minifix Cap 15mm 23 Nos E Shoulder Screw 6x50mm 10 Nos F Screw 3x30mm 04 Nos G Screw 3x16mm 56 Nos H Shelf Pin 8x 5x16mm 12 Nos I PVC Connector 31mmx21mmx21mm 07 Nos 215mmx25mmx18mm 04 Nos 72mmx25mmx02mm 04 Nos 1284mmx19mmx32mm 01 Nos Sr. No.
PARTS LIST S1 S11 S9 S3 S4 S12 S10 S8 S5 S24 S16 S17 S16 S13 S6 S23 S7 S18 S14 S15 S14 S20 S2 S19 S22 S21
Step 1 B A S24 S9 B A B B S8 B B Attach Minifix twister (B) to part (S24, S8) with screwdriver. Insert Dowel (A) into part (S9).
Step 2 S5 S4 Part (A) should be fix in blind holes. Insert wooden dowel (A) into part (S4,S5). Attach Minifix Twister (B)to part(S4,S5) with screwdriver.
Step 3 S24 S5 S8 S4 Attach part (S8, S24) to part (S4,S5), then insert and secure Minifix Roster(C)to part (S4,S5)
Step 4 S7 S6 Insert wooden dowel (A) into part (S6, S7).
Step 5 S3 S12 Attach Minifix Twister(B)to part(S12,S3) with screwdriver.Insert wooden dowel (A) into part (S3).
Step 6 S3 S12 Attach part (S12) to part (S3),then insert and Minifix Roaster (C) to part (S3) to lock it.
Step 7 O S11 O O S1 First fix dowel (A) in part (S1) Then Attach part (S11,S1) with screw (O). Insert Minifix Twister (B) to part (S1)with screwdriver.
Step 8 E Edge Bend Side S9 E S3 Attach part (S9) to part (S3) using bolt (E) with Screwdriver.
Step 9 S9 S5 S3 S24 S12 Attach part (S5,S24) to part (S3,S12) then insert Twister Roster (C) in part (S3, S12) and secure to lock it.
Step 10 S4 S9 S3 S12 S5 S24 Attach part (S4,S8) to part (S3,S12) then insert Minifix Roster(C) in part (S3,S12) and secure to lock it S8
Step 11 S4 S3 S9 S12 C C S7 S5 S24 Attach part (S7) to part (S3) by Minifix Roster (C) to secure to lock it tightly.
Step 12 S9 S5 S3 S7 S12 S24 C S6 C S4 S8 Attach part (S6) to part (S3) by Minifix Roster (C) to secure to lock it tightly.
Step 13 S10 S5 S24 S3 S7 S9 S12 S6 S4 S8 Slide back panel (S10) into grooves as per diagram.
Step 14 S10 S5 S16 S3 S7 S17 S6 S16 Slide back panel (S16, S17) into grooves as per diagram.
Step 15 S10 S16 S17 S13 S5 Slide 1 S23 S7 S16 Slide 2 S4 S6 First - Attach part (S13) to part (S17) by sliding into Grooves. Second - Attach part (S23) to part (S13) by sliding into Grooves. After Fixing bottom side Up.
Step 16 E E E E E S2 E E E E S4 S6 S16 S23 S1 3 S7 S5 S17 S16 S10 Attach part (S2) to part (S4,S6,S7,S5) using Screw (E) with Screw Driver.
Step 17 G G I I I S22 S20 I I I I S21 Attach connectors (I) to part (S22,S20,S21) using Screw (G) with Screw Driver.
Step 18 G G I S22 G G I S21 Attach part (S22) to part (S21) using Screw (G) with Screw Driver.
Step 19 G G G S20 G I S22 S21 Attach part (S20) to part (S21) using Screw (G) with Screw Driver.
Step 20 G After Fixing Skirting S20 S21 S2 S22 S22 S21 S2 S20 Attach Base unit (S20,S21,S22) to part (S2) using connector (I) with Screw (G) and Screw Driver.
Step 21 S1 S11 S10 C C S5 C C S9 S4 S1 S11 C S4 S8 C S10 S9 S5 S24 Attach part (S1,S11) part (S4,S5,S9) then insert and secure Minifix Roster (C) to part (S4,S5,S9) to lock it.
Step 22 F S8 S4 L F S3 S12 S5 F S24 F F Attach slide Rail (L) to Parts (S8,S12,S24) with screw (E) by screw driver
Step 23 D D D D D Place Minifix Cap (D) over holes where as Minifix Roster used.
Step 24 H S5 S7 S6 S4 S4 S6 S7 Insert shelf support pin (H) into part (S4,S6,S7,S5) S5
Step 25 S5 S7 S4 S6 S14 S15 S14 Place shelf (S14,S15) on top of support pins.
Step 26 G S18 G G K G G S19 K G K G G K Attach Wheel Bracket small(K) to Parts (S18,S19) with screw (G) by Screw Driver. as above picture. Step 27 SH SH S18 S19 G G G Attach both Screw(G) to Handle(SH) into part(S18,S19) Simultaneously and then tighten with Screw driver as above picture. Detail Steps 1.Insert screw in one of the hole meant for door handle and turn 1-2 thread only. 2.Insert screw in another hole in door, match the hole in handle and turn 1-2 threads in handle. 3.
Step 28 A ZOOM VIEW “A” S18 S19 Place Parts (S18,S19) one by one as above picture.
Step 29 A Large View of “A J J J G G S19 J G G G G G S18 G Attach Part (J) to (S18,S19) with screw (G) by screw driver. After fixing it look like a large view of “A”.
Step 30 Final Assembly Final Assembly Look like.
