Instructions / Assembly

“Breathe” Mod Podge Trio
By Chris Williams
Supplies
 Mod Podge ® Acrylic Shapes
 Mod Podge ® Podgeable Paper Flip Book-Nature
 FolkArt ® Acrylic Colors - Mushroom
 FolkArt ® Artists Pigments™ - Titanium White
 Mod Podge ® Dimensional Magic - Glitter Silver
 Mod Podge ® Matte
 Paintbrush
 Paper towels
 3 Piece Box Set with Tray
 Wax Candle
 Fine Grit Sandpaper
 Scissors
 Small Brass Charm Embellishments
 E6000 Glue
 Pencil
 Scissors
Instructions
Please read and follow all manufacturers’ instructions for all tools and materials used. Provide adult supervision if children participate in this
project.
Disclaimer: The information found in each project is presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom
from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained,
Plaid Enterprises, Inc.disclaims any liability for untoward results.
Intermediate Skill Level | 1 Hour Crafting Time
1. Using ¾” Flat Brush, base coat wood surface with Mushroom. Allow to dry.
2. Sand smooth using fine grit sandpaper and reapply Mushroom base coat.
3. When completely dry, rub candle over all edges and a few random areas over top surface.
4. Base coat Titanium White over entire surface and allow to dry.
5. Sand entire surface smooth once more to distress. Note: Areas where candle wax was
applied will reveal Mushroom base coat.
6. Cut desired paper designs using scissors. Carefully place paper patterns where desired over
wood surfaces and Mod Podge in place. Smooth in place and reapply Mod Podge over
paper.
7. Apply Matte Mod Podge to top of paper circle; apply matching Mod Podge shape directly
over Mod Podge’d paper and apply pressure to smooth paper. Allow to dry. If desired, apply
3D dimension by adding a bird to top of shape. Allow to dry.
8. When dry, trim excess paper from shape if necessary.
9. Apply Dimensional Mod Podge Clear and/or Silver over desired elements and allow to dry.
10. Using E6000 adhesive, glue brass charm embellishments and Mod Podge shape where
desired.