Use and Care Manual

ManualsBrandsMOD ManualsOutdoor Lounge ChairsWilla Steel Outdoor Hanging Egg Chair with Gray Cushions

GCS09062H

Outdoor Furniture

IMPORTANT

If you have any problems with this product (missing or damaged parts, assembly issues, etc.),

PLEASE DO NOT RETURN TO THE RETAILER/STORE

where you purchased the product.

Please call our Toll-Free Customer Service Hotline at:

1-866-988-3300

Between 8:00 AM and 5:00 PM Pacific Standard Time, Monday through Friday

To expedite any future warranty claims, please retain the instruction sheet, warranty card

and receipt for future use.

Care and Maintenance

Store furniture in an upright position. Be careful not to allow water to build up in frames, as this will cause

corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water.

Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax

for maximum protection against UV rays and/or salty, damp air. If your set includes cushions, slings, and/or

an umbrella, they may be cleaned by hand with a solution of soap and water with a clean water rinse.

(Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or damage). After

cleaning cushions, tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry

fabric goods). Do not use bleach or solvents to clean any product! This will void the warranty.

Summary of content (8 pages)

PAGE 1
GCS09062H Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE where you purchased the product. Please call our Toll-Free Customer Service Hotline at: 1-866-988-3300 Between 8:00 AM and 5:00 PM Pacific Standard Time, Monday through Friday To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use.
PAGE 2
GCS09062H Outdoor Furniture 1-Year Limited Warranty Program For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
PAGE 3
Assembly Instructions GCS09062H Hanging Egg Chair Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. -5 p.m., PST Monday - Friday Retain this manual for future use.
PAGE 4
GCS09062H Parts & Tools PART QTY PICTURE & DESCRIPTION A 1 Left base B 1 Right base C 1 D 1 E 1 F PART QTY PICTURE & DESCRIPTION T 2 Post plastic part U 1 Connection part Lower hanging bar V 1 Upper hanging bar W 1 Wrench 4 M6 Screw Cover X Back frame 1 Y 2 Z 1 Hex key M8 Screw Cover Seat frame G 2 M8x55 Bolt H 2 M8x15 Bolt I 2 M8x25 Combination bolt and washer J 4 M8x30 Combination bolt and washer K 4 M6x45 Combination bolt and washer Cushion 1
PAGE 5
GCS09062H L 2 M6x15 Combination bolt and washer M 4 M6 Washer N 4 M6 Nut O 10 M8 Washer P 8 M8 Spring washer Q 8 M8 Nut R 1 Hook S 2 Plastic muffler WARNING: To avoid damage of this production, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly.
PAGE 6
GCS09062H Egg Chair Assembly Step 1: • Connect left base (A) and right base (B) by using post plastic part (T) and connection part (U). Using the M6x15 combination bolt and washer (L), lightly tighten the bolts using the hex key (V). • Line up the bolt holes on the end of the left base (A) with the corresponding bolt holes on the right base (B). Using M8x25 combination bolt and washer (I), M8 washer(O) and M8 spring washer (P), M8 nut (Q), lightly tighten the bolts using the hex key (V)and wrench (W).
PAGE 7
GCS09062H Step 3: • • • Connect the upper hanging bar(D)and lower hanging bar(C)by using post plastic part(T). Using M8x55 bolt(G),M8 washer(O)and M8 nut(Q),tighten all bolts using the hex key(V)and wrench(W)add M8 screw cover(Y) as shown below. Attach the plastic muffler(S) to the hook of upper hang bar(D). Step 4: • • • • Attach the back frame (E) to the seat frame (F) by lining up the bolt holes on the back frame (E) with the corresponding bolt holes on the seat frame (F).
PAGE 8
GCS09062H Step 5: • • Follow the diagram to open the hook (R). Connect the upper hanging bar (D) and back frame (E) by using the hook (R). Then tighten the hook (R) by turning in a counter-clockwise direction. Place the cushion (Z) on the hanging swing seat as shown. Step 6: • Open the hook of the safety rope on the seat frame (F) and pass through the bottom of the lower hanging bar (C). Then tighten the hook of safety rope.