User Manual

Pure Power AC

Train Controller for AC Powered Trains

CAUTION – ELECTRICALLY OPERATED PRODUCT

As with all electric products, precautions should be observed

during handling and use to reduce the risk of electric shock

For Your Protection

• Not recommended for children under 12 years of age.

• Turn off the power switch when it is not in use.

• Do not use or store in damp areas.

• Do not open the cabinet and try to repair it by yourself.

• Before returning your unit for repair or servicing, make certain it is

defective. Do not shut down your layout unnecessarily.

• Never operate a DC powered locomotive with your Pure Power AC.

This may damage your locomotive motor.

Congratulations!

You have just purchased an advanced AC train control power

pack. MRC’s Pure Power AC power pack has all the power

needed to run larger scales. The true state of art and pure Sine

Wave Technology will enhance the performance of your layout for

many years.

Features

• Pure AC sine wave output assures compatibility with most AC loco

sound systems.

• Horn/whistle and bell buttons.

• Direction button

• Pilot light, master on-off switch and overload indicator.

• Nostalgic retro design: Rugged cabinetry with slide transformer for

smooth linear control.

• Fixed 14 VAC output terminals for accessories.

• Heavy duty wire attachment lugs. No tools needed.

Electrical Specifications

INPUT – 120VAC, 60Hz

OUTPUT – 0-17.5 VAC Variable for Track, 14 VAC for Accessories

130 Watts Sustained power output

Operating Instructions

THROTTLE HANDLE INSTALLATION – For shipping purposes the throttle

handle of your new Pure Power AC power pack is packaged separately. The

shaft of the transformer is “D” shaped. To install the handle, line up the “D”

shaped hole on the handle with the shaft and press the handle down on the

shaft. If your handle feels loose on the shaft place a piece of transparent tape

over the shaft and press handle down.

Never glue the handle to the shaft.

Never carry your Pure Power AC by the throttle handle.

It is recommended that you save your Pure Power AC power pack box

and styrofoam inserts.

PAGE 1
Pure Power AC Train Controller for AC Powered Trains Congratulations! You have just purchased an advanced AC train control power pack. MRC’s Pure Power AC power pack has all the power needed to run larger scales. The true state of art and pure Sine Wave Technology will enhance the performance of your layout for many years. Features • Pure AC sine wave output assures compatibility with most AC loco sound systems. • Horn/whistle and bell buttons.
PAGE 2
CONTROLS MASTER ON/OFF SWITCH: The master on-off switch disconnects the input power from your MRC Pure Power AC and shuts the unit down completely. The pilot light will glow when the unit is turned on. DIRECTION BUTTON: The direction button disables the voltage applied to the track and thereby reverses the direction of your locomotive. This button should only be operated when the locomotive is not moving. Pressing the direction button once will cause the loco to idle.