User Manual

ManualsBrandsModel Rectifier Corporation ManualsHobbyPure Power Dual AC, 270W

PURE POWER DUAL

TRAIN CONTROLLER

FOR AC POWERED TRAINS AH601

CAUTION – ELECTRICALLY OPERATED PRODUCT

As with all electric products, precautions should be observed

during handling and use to reduce the risk of electric shock.

FOR YOUR PROTECTION

• Not recommended for children under 12 years of age.

• Turn off the power switch when it is not in use.

• Do not use or store in damp areas.

• Do not open the cabinet and try to repair it by yourself.

• Before returning your unit for repair or servicing, make certain

it is defective. Do not shut down your layout unnecessarily.

• Never operate a DC powered locomotive with your Pure Power

Dual. This may damage your locomotive motor.

FEATURES

• Pure smooth AC sine wave output assures compatibility with most AC

loco sound systems

• Dual throttle control to operate two trains on different tracks

• Horn/whistle, bell and direction buttons for each throttle

• Pilot light, master on-off switch

• Nostalgic retro design: rugged cabinetry with slide transformer for

smooth linear control

• Fixed 14 VAC output terminals for accessories

• Heavy-duty wire attachment lugs - no tools needed

• Voltage and current meters for each throttle to monitor layout conditions

ELECTRICAL SPECIFICATIONS

INPUT: 120 VAC, 60 Hz

OUTPUT: 0 to 21 VAC variable for track, 14 VAC for accessories

270 Watts sustained power output

It is recommended that you save your Pure Power Dual

power pack box and styrofoam inserts.

Summary of content (4 pages)

PAGE 1
PURE POWER DUAL TRAIN CONTROLLER FOR AC POWERED TRAINS AH601 CAUTION – ELECTRICALLY OPERATED PRODUCT As with all electric products, precautions should be observed during handling and use to reduce the risk of electric shock. FOR YOUR PROTECTION • Not recommended for children under 12 years of age. • Turn off the power switch when it is not in use. • Do not use or store in damp areas. • Do not open the cabinet and try to repair it by yourself.
PAGE 2
CONGRATULATIONS! Thank you for purchasing MRC’s advanced AC dual power train control. MRC’s Pure Power Dual has all the power needed to operate your AC powered trains. The true state of art and pure smooth Sine Wave Technology will enhance the performance of your layout for years to come. CONTROLS THROTTLE HANDLES Install the two throttle handles by pressing them onto the sides of the unit. Should the handles become loose, apply some self-adhesive tape to the shaft and then reinstall the throttle handles.
PAGE 3
If your locomotive is equipped with an on board sound system, you can activate the sounds by pushing the sound buttons accordingly. If the sounds do not correspond to the appropriate buttons, reverse the wires going from the unit to track lock-on. Please note, there is a slight voltage drop associated with the activation of the sound buttons. Your locomotive may slow down depending on its speed and load. This is normal and not to be considered a defect in the product.
PAGE 4
TERMINALS ACCESSORIES AC These terminals supply 14 VAC for use with AC accessories. Polarity does not matter. The circuit breaker will trip if overload occurs. VARIABLE AC The terminals marked Track 0-21 VAC are for attachment of your Pure Power Dual to the main line of your layout. Connect one terminal to the inner rail or to clip 1 on a track lock on, and the other terminal to the outer rails or to clip 2 on a track lock on.