User Manual

ManualsBrandsModel Rectifier Corporation ManualsHobbyTrainpower 6200

CAUTION

ELECTRICALLY OPERATED PRODUCT

NOT RECOMMENED FOR CHILDREN

UNDER 12 YEARS OF AGE.

AS WITH ALL ELECTRIC PRODUCTS,

PRECAUTIONS SHOULD BE OBSERVED DURING

HANDLING AND USE TO PREVENT ELECTRIC SHOCK.

PLEASE READ INSTRUCTIONS THROUGHLY

BEFORE MAKING ANY HOOKUP TO YOUR LAYOUT.

OPERATING INSTRUCTIONS FOR

TRAINPOWER 6200

MODEL RECTIFIER CORPORATION

80 NEWFIELD AVENUE, EDISON, NJ 08837

(732) 225-6360

Summary of content (4 pages)

PAGE 1
CAUTION ELECTRICALLY OPERATED PRODUCT NOT RECOMMENED FOR CHILDREN UNDER 12 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK. PLEASE READ INSTRUCTIONS THROUGHLY BEFORE MAKING ANY HOOKUP TO YOUR LAYOUT.
PAGE 2
CONGRATULATIONS! You have just purchased one of the most advanced train controls on the market. MRC’s TRAINPOWER 6200 was designed to fulfill the needs of large scale model railroads including the LGB line of railway equipment, yet accommodates small scale railways as well. Our solid-state circuitry makes the already smooth motors of large locomotives run more evenly and realistically than before, with crisp control between the throttle and locomotive.
PAGE 3
MODE SWITCH The switch in the Mode I position provides more track voltage for LGB trains only; when the switch is in the Mode II position, the track voltage is lowered for the operation of HO scale or smaller locomotives. INDICATORS POWER MONITOR The Power Monitor lamp is used to give an approximate indication of output voltage. You will find this very useful in detecting shorts or opens on your track, etc.
PAGE 4
FOR YOUR PROTECTION 1) Never reverse a locomotive without stopping it first. To do so may damage the locomotive engine. 2) Never connect a locomotive to the AC terminals of your TRAINPOWER 6200 as this may damage your locomotive motor. 3) Turn the power switch off at the end of a day’s operation. 4) When a short circuit or power overload occurs and the circuit protector trips, turn the TRAINPOWER 6200 off and correct the short or overload.