Technical data

transcript

CR-158 ModelSim Commands ModelSim EE/SE Command Reference

transcript

The transcript command controls echoing of commands executed in a macro file;

also works at top level in batch mode. If no option is specified, the current setting

is reported.

Syntax

transcript

[on | off | -q | quietly]

Arguments

Specifies that commands in a macro file will be echoed to the Transcript window

as they are executed. Optional.

off

Specifies that commands in a macro file will not be echoed to the Transcript

window as they are executed. Optional.

-q

Returns "0" if transcripting is turned off or "1" if transcripting is turned on. Useful

in a Tcl conditional expression. Optional.

quietly

Turns off the transcript echo for all commands. To turn off echoing for individual

commands see the quietly command

(CR-127). Optional.

Examples

transcript on

Commands within a macro file will be echoed to the Transcript window as they are

executed.

transcript

If issued immediately after the previous example, the message:

Macro transcripting is turned on.

would appear in the Transcript window.