Technical data

drivers
ModelSim EE/SE Command Reference ModelSim Commands CR-73
drivers
The drivers command displays in the Main window the current value and
scheduled future values for all the drivers of a specified VHDL signal or Verilog
net. The driver list is expressed relative to the top most design signal/net
connected to the specified signal/net. If the signal/net is a record or array, each
sub-element is displayed individually. This command reveals the operation of
transport and inertial delays and assists in debugging models.
Syntax
drivers
<item_name>
Arguments
<item_name>
Specifies the name of the signal or net whose values are to be shown. Required.
All signal or net types are valid. Multiple names and wild cards are accepted.