Notification Pager Receiver Manual MODEL ID: P0004930100R
Notification Pager Notification Pager Functions Notification pager will notify the operator (Sound/Vibration) when irregularities occur during autonomous cleaning or when the machine encounters obstacles. When using the notification pager for the first time, please take the pager out of the package box, connect pager transmitter to robot and charge the pager receiver. (⇒see "Recharging the Notification Pager'). Notification pager can only be used during autonomous cleaning. No.
Notification Pager Receiver Functions & Usage When the machine detects danger or detects an obstacle, an alert will be displayed on the notification pager receiver (⇒see "Alert display and its notification timing") and it notifies the operator by emitting an alert and vibrating. It emits an alert and vibrates for 15 seconds then stops for 5 seconds, which it repeats for 10 minutes.
Alert display and its notification timing Appearing on display Description Appearing on display Description Standby (within the Autonomous cleaning communication range/paired) complete Machine battery level low No machine battery remaining Dustbag full Connected for wireless communication Connection for wireless Error alert communication not possible ・When danger has been (outside communication rang detected near obstacles or e/not paired) steps ・When the emergency stop button has been pr
Turning the Notification Pager Receiver On/Off When using the notification pager for the first time, long pressing receiver button and turn the power On. Turning the Notification Pager Receiver On 1 Long pressing the main button on the side of the notification pager Keep 10s pressing the main button until the notification pager receiver vibrates. An icon appears on the display.
Turning the Notification Pager Receiver Off 1 Long pressing the main button on the side of the notification pager receiver The display goes out.
Setup the Notification Pager In order to receive the alert on the notification pager, the notification pager transmitter must be setup in Whiz i. 1 Turn on the notification pager receiver and the machine 2 Check if the machine is connected to the Robot Operations Center (ROC) Please check your mobile phone cellular connection in advance. Robot Operations Center (ROC) will not be connected to LTE in an area where there is no signal.
3 Attach the pager transmitter to the pager holder on the top of the machine Carry out autonomous cleaning and check if you will receive the alerts (⇒see "Carrying Out Autonomous Cleaning").
Recharging the Notification Pager Receiver If notification pager receiver battery is running low, charge the receiver fully before using it. 1 Insert the Micro USB cable into the notification pager receiver 2 Connect the USB cable into a USB AC adpapter, and plug the adapter into an outlet The customer must purchase a USB AC adapter themselves. 3 Place the notification pager receiver in its charger An AC adapter is not included in the product package. The customer must use their own AC adapter.
Safety Warnings About Safety Warnings IMPORTANT SAFETY INFORMATION: Please read and understand these Safety Warnings prior to unpacking and using the machine. Warnings presented here are intended to warn the user of potential harm to the user and other persons as well as damage to property. Always adhere to them to reduce the potential for harm.
Description of Symbols The following symbol categories explain the level of harm or damage that can occur if warnings are not observed and if the equipment is used incorrectly. Please be sure you understand these symbols and their correlating meanings before reading the remainder of this manual. DANGER WARNING CAUTION Indicates a hazardous situation that, if not avoided, will result in death or serious injury Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Handling the Notification Pager DANGER Do not drop or throw. Subjecting the notification pager to a strong impact may cause the battery pack in the notification pager to leak, overheat, rupture, or ignite, and otherwise result in injury, electric shock, damage, malfunction, overheating, leakage, chemical explosion, or other damage to the machine, battery charger, battery or notification pager. WARNING Store out of the reach of infants and access of pets.
Pictorial Symbols Refer to the labels on each product (the machine, battery charger, battery). Do not short-circuit. Do not disassemble. Do not immerse in water or other liquid. Machine Disposal and Recycling The machine you have purchased is designed and manufactured with recyclable, high-quality materials and components.
