Manualshelf

User's Manual

ManualsBrandsModeLabs manufacture ManualsCell PhonesQuad-band GSM/GPRS/EGPRS 850/900/1800/1900 Mobile Phone with Bluetooth
31323334353637383940
35
Settings
Settings menu content
1. User profiles
2. Bluetooth
3. Diorphone setup
4. Network setup
5. Call setup
6. Security setup
7. Restore factory settings
User Profiles
Use this menu to customize various sounds. Select one profile and select “Activate” to activate the
setting. Select “Customize” to customize the Profile settings. Customizable options are the following:
o Tone Setup: Incoming Call, alarm, Power On, Message Tone and Keypad Tone
o Volume: Ring Tone, Keypad Tone.
o Alert Type: Ring, Vibration Only, Vibration And Ring, Vibration then ring.
o Ring Type: Single/ Repeat/ Ascending.
o Extra Tone: Warning/ Error/ Camp On/ Connect.
o Answer Mode: lets you select which answer mode you want to enable
Bluetooth
To connect your Diorphone to other Bluetooth devices, set this option to ON.
Bluetooth icon will appear on the home screen. The Diorphone Bluetooth power will be turned on, until
you turn the Bluetooth Mode off. When you turn off your Diorphone, and turn on the next time, the
Bluetooth power will be On. If the Bluetooth device was connected, the Diorphone connects to the
device when the Diorphone power is back on.
Note: When you are not using the Bluetooth feature, set the Bluetooth Mode to Off, in order to save
the battery power.
Inquiry Audio Device
This option will search for Audio device(s) within the range of your Diorphone (approx. 10 meters).
1. Put the device nearest possible when you search a new device.
2. Check to turn on your Diorphone and the new device. For turning on your new device, see
instruction provided by the device manufacturer. Make sure your Diorphone is in Bluetooth Mode.
3. Select “Search Audio Device” to find the new device.
4. After your Diorphone finds the device, press [Pair] soft key (left), it might ask for a pass code.
Default pass code is depending on the Bluetooth device. You might try 0000 as a pass code. Usually
the Bluetooth audio device provides a guide with this pass code.
The Diorphone and device will be paired and connected. If you fail this pair procedure, try again or
contact the device manufacturer, or change to other device.