Datasheet

Best.-Nr. 230321, LIPO SAVER 2 ZELLEN 6V

The LED will light to warn "Low battery" when the 7,4V LiPo battery has dropped to 6V.

Connection: connect LiPo saver with the LiPo battery pack in parallel

technical information:

- input voltage: DC7,4V (2 x LiPo batteries)

- measured LED trigger voltage: 6,3V

- supplier declare LED trigger voltage: 6,0V

- measured current consumption (when the LED turns on): 9,6mA

- cable length: 29cm

PAGE 1
Best.-Nr. 230321, LIPO SAVER 2 ZELLEN 6V The LED will light to warn "Low battery" when the 7,4V LiPo battery has dropped to 6V.
PAGE 2
NO. 1412 NO. 1413 NO. 1414 NO. 1421 NO. 1422 LIPO SAVER 2 CELL Best.-Nr. 230321 LIPO SAVER 3 CELL Best.-Nr. 230327 LIPO SAVER 4 CELL Best.-Nr. 230328 LIPO REGULATOR 4.8V Best.-Nr. 230329 LIPO REGULATOR 6V Best.-Nr. 230330 INSTRUCTION LIPO SAVER English * Function : The power is exhausted completely when the voltage of per cell is at 2.5V, so the warning LED will light to warn “Low Battery” at 3V. * How to use : Connect Lipo Saver with the Lipo battery pack in parallel.