Thank you for purchasing iDance Audio System PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATION THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WHAT’S IN THE BOX Contents 1. iDance CN1 2. Instruction Manual OVERVIEW The iDance CN1 is a Wireless all-in-one DJ Party box System with an integrated mixer, which accepts microphone, guitar, line-in audio, and stereo Bluetooth wireless audio up to 10 meters. Only few simple steps to pair your device!! The CN1 is perfect for DJ, house / pool / yard party, or for karaoke applications.
WARNING The exclamation mark inside an equilateral triangle is intended to alert user of the presence of the important operating and maintenance (servicing) instructions in the literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
FEATURES Bluetooth wireless stereo audio streaming Support A2DP Profiles for most smart phones / laptops Aux In input (3.5 mm Stereo Mini Jack) Aux Out output (3.5 mm Stereo Mini Jack) Disco ball with Disco light effect Micro USB jack for battery charging Built-in battery for unit power CONTENTS WHAT’S IN THE BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 WARNING ........................
CONTROL LOCATION 1. DISCO BALL Show the different color LED light show. 2. AUX Out (Line Output / Audio Output) 3.5mm Jack Connect external PA system to this master output for bigger sound. The sound output level controlled by connected Bluetooth device. 3. MICRO USB JACK Connect the USB cable to charging the built-in battery. 4. LED Indicator Bluetooth Mode: The indicator will light when bluetooth pairing successful. The indicator will be flash when bluetooth start pairing now.
GENERAL OPERATIONS Connect to external adapter or computer USB port Connect micro USB plug of USB cable to main unit micro USB jack and plug the other to computer USB output port or external adapter output port. Charging Battery 1. Charging the built-in battery by connect power of 10-12 hours prior to first use. 2. When the built-in battery charging now, the charging indicator light red. 3. If the charging indicator is now at rest that the built-in battery fully charging. 4.
TROUBESHOOTING If you have followed the instructions and are having difficulty operating the unit, locate the PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE AND SOLUTION column to locate and fix the problem. PROBLEM POSSIBLE CAUSE AND SOLUTION Make sure no other device from your friend or family is connected to CN1. When CN1 Bluetooth is connected, Bluetooth cannot connect to press BLUETOOTH button would stay ON. So make sure CN1 CN1 indicating Bluetooth is ready to connect.
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
