User Manual

4. Close the CD door by press the Button; the unit will start playback

Repeat Playback:

automatically.

5. During playback:

A. Press the PAIR/ Button to pause; press again to resume normal

playback.

B. Press the or Buttons repeatedly to skip tracks.

C. Press and hold the or Buttons to fast searching the specific

section then release the button to resume normal playback.

D. Press the DISPLAY Button to read the actual time.



6. To stop CD playback, press the ■ Button. The total number of tracks

will appear on the display.

7. When finished listening, press the Button to power off

(standby mode) the unit.

1. During playback, press the P-MODE/CLK SET Button once. The

repeat indicator “REPEAT 1” will appear on the display. The current

track will playback repeatedly.

2. During playback, press the P-MODE/CLK SET Button twice. The

repeat all indicator “REPEAT ALL” will appear on the display. All the

tracks on the current disc (or program) will be playback repeatedly.

3. To cancel the repeat function, press the P-MODE/CLK SET Button

repeatedly until all the repeat indicators disappear on the display.

Programmed Playback:

Up to 20 tracks can be programmed playback as follows:

1. In CD STOP playback mode, press and hold the P-MODE/CLK SET

Button until “PROG 00” appear on the display.

2. Select the first specific track to be programmed by press the

or Buttons.

3. Press the P-MODE/CLK SET Button again to store the selected track

into the memory.

4. Repeat steps 2 and 3 until all the specific tracks were stored into the

memory.

5. Press the PAIR/ Button to start playback.

6. To stop playback, press the ■ Button.

7. To cancel the program, press the ■ Button again in stop mode. Indicator

“PROG” will disappear on the display.