User Manual

Symptom
Power
Radio
BT
CD
No power
Noise or
sound distorted
on radio
broadcasts
No sound
BT not functioning
Sound
CD not play Unit not set to CD mode.
CD is installed incorrectly.
In power on mode, press the
FUNCTION Button repeatedly
until “---” or “no” (No Disc)
appear on the display to enter
to CD playback mode.
Place the CD disc on the CD
tray, with the printed label side up.
Distortion or
Intermittent sound
Dirty or defective disc.
Try others CD disc.
distortion
Possible Cause Solution
TROUBLE SHOOTING GUIDE
14
Plug from AC Power Cord
had not inserted to AC
wall outlet.
Station not tuned properly. Retune the radio
station.
The location not good for
radio reception.
Volume at minimum.
The BT Device had not
paired to the unit.
The BT Device too far
from the unit.
Paired the BT Device to
the unit as page 8-9
Place the BT Device
close to the unit.
Unwind the FM Antenna
Wire on the rear of to full
length and/or relocation it.
Reassembly the unit to
another location for better
Radio reception.
Increase Volume level by
press the VOL + (VOL
UP) Button.
Insert the plug to wall
outlet having
AC 120V~, 60 Hz.