User Manual

PULL

CR2025

OPEN

PUSH

To replace the button cell if it is consume:

BATTERY PRECAUTIONS:

1. Push and slide out the battery tray as the illustrated below.

2. Replace the button cell by a new CR2025 button cell with the polarity “+” face up as

the illustrated below and the marking on the rear of Remote Control.

3. Close the battery tray.

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.

2. Be sure to follow the correct polarity when installing the battery as indicated

in the battery compartment. A reversed battery may cause damage to the

device.

3. Do not mix different types of batteries together (e.g. Alkaline and

Carbon-zinc) or old batteries with fresh ones.

4. If the batteries in the device are consumed or the device is not to be used for

a long period of time, remove the batteries to prevent damage or injury from

possible battery leakage.

5. Do not try to recharge the battery not intended to be recharged; it can

overheat and rupture. (Follow battery manufacturer’s instructions.)

6. Do not dispose of battery in fire. Battery may explodes or leak.

7. Clean the battery contacts and also those of the device prior to battery

installation.

8. This product contains a coin/button cell battery. If the coin/button cell battery

is swallowed, it can cause severe internal burn in just 2 hours and can lead to

death. Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and keep it

away from children. If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate medical attention.

Remote Control:

In first time use, remove and discard the insulation film on the battery compartment

as the illustrated follows:

PULL

PAIRPAIR