User's Manual

10
3. When disc installed, press the REPEAT button twice and REPEAT indicator
will be light. The unit will play the entire disc repeatedly.
4. To cancel the repeat function: press the REPEAT button repeatedly
the REPEAT indicator light off or press the STOP button twice to stop.
1. When disc playing, press the STOP button to stop mode.
2. Press the PROGRAM button and the PROG indicator will
light.
3. Press the SKIP / SEARCH buttons to forward or back to select a
desired track number.
4. Press the PROGRAM button to confirm.
5. Repeat steps 3 and 4 to program to play in a specified order.
6. Press the PLAY/PAUSE button to start the program playing.
7. Press the STOP button twice to cancel a program.
Programming a Disc up to 20 tracks
1.
Rotate the SOURCE selector to BT/LINE IN position to connect your
external Bluetooth device and the display will show bt and flash.
2. Set the Bluetooth function of your external device to ON and begin searching
for devices.
Note: The effective distance between your external device and this apparatus
is 10 meters (30 feet).
3.
Once “ JT1067 ” appears on the paired device list of your external device, select it.
Notes: If cannot connect, press PAIR button to reconnect again.
4. If you are asked for a password, enter “0000”
5. When both devices are successfully connected an audible chime will sound
and the display will show bt and stop flash, now you are ready to play music
wirelessly from your device.
6. Press the PLAY button of external Bluetooth device to start music playback.
7. Press the NEXT / PREV of the unit or external Bluetooth device to switch
between music tracks.
Note: After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired or your find it is unable to connect, repeat the above steps or press
& hold the PAIR button again.
Connecting Bluetooth to Your Smartphone / Tablet