User's Manual

8
Plug the included AC adapter into the standard AC power outlet to power the
SLIM/FLAT CDG KARAOKE. Connect small end to DC INPUT jack of main
unit. After adapter connection, rotate the SOURCE selector to CD+G mode or
Line in/BT mode position to turn on the unit."
Before installing batteries (not included),ensure that the unit is disconnected from
the mains supply.
Remove the battery compartment cover on the back of the unit by carefully
pushing the two lugs left. The battery cover can then be lifted away. Fit the 1.5V
(UM2) x 6 pcs batteries (not included), referring to the polarity markings. Finally,
replace the cover
For battery operation, remove the adapter from the wall outlet and unplug from
the unit.
To connect a MP3 Player or other Audio Device you will need a 3.5mm
Auxiliary Cable (not included).
1. Connect a 3.5mm Auxiliary Cable to the LINE IN jack at the rear side of unit
and to the Audio Output or Phones on the audio device you wish to play.
2.
Rotate
SLIM/FLAT CDG KARAOKE display will show AU.
the SOURCE selector of the Unit to LINE IN / BT posi
tion and the
3. Make sure your external music player is turned on..
Setu
p
Power
Connect Power Adapter
LINE IN
(
AUX In/ AUDIO In
)
Connect Ext. Device & Sound From Main Unit S
p
eaker
Battery Operation
Warning!
1. Danger of explosion if batteries are incorrectly replaced.
2. Replace batteries with the same equivalent type only.
AC~120V 60Hz
AC adapter
REAR SIDE OF MAIN UNIT