User's Manual

E-6
7. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions).
8. Do not dispose of batteries in fire, batteries may leak or explode.
CLOCK SETTING
1. In standby mode, press and hold the MEM / CLK BUTTON (#5). The “12H” will
blink.
2. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to set the
12Hour or 24Hour format.
3. Press the MEM / CLK BUTTON (#5) to confirm. The hour digits will blink.
4. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to set the
current hour.
5. Press the MEM / CLK BUTTON (#5) to confirm. The minute digits will blink.
6. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to set the
current minute.
7. Press the MEM / CLK button to confirm and the Clock Setting is completed.
NOTE:
1. The clock settings may be lost if the main power switch is turned off and the battery
drains after a period of time. If this occurs, you will need to reset the clock.
2. The PM ICON (#15) will light when the 12hour format is selected
TIMER SETTING
In any mode, press the TIMER BUTTON (#4), the TIMER icon (#16) with time “180” will
show in LCD Display and flash.
1. Press the TIMER BUTTON (#4) repeatedly to adjust the timer in decrements of 10
minutes.
2. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to adjust
the timer in increments / decrements of 1 minute.
3. After the set time is reachedI, the SMPS-628 alarm will sound.
4. When alarm sound, press the STANDBY BUTTON to stop the alarm.