User's Manual

E-8
5. If you are pairing (linking) your computer to the speaker using Bluetooth, you may
need to set the SMPS-628 as your computer’s default sound device.
6. After successfully pairing (linking) the Bluetooth enable device, the BLUETOOTH
ICON (#12) will stop flashing and remain lit and the sound “DOM” will be heard.
7. If you want to connect the SMPS-628 to another Bluetooth device, press and hold
the
BUTTON (#6) for about 3~4 seconds, the BLUETOOTH ICON
(#12) will flash to confirm the SMPS-628 enter the Pairing/Discoverable mode
again. Repeat steps 3 and 4.
To connect previously paired Bluetooth device
SMPS-628 can store one previously paired device for quick pairing during power on.
When the unit is powered on and the previously paired device is found within the
operating range, the unit will pair the device automatically.
NOTE:
• Due to different operating system of Bluetooth devices, the time taken by pairing
process might be different. If the pairing cannot be successful in the first time,
please try to restart the pairing process by pressing the
button twice
again and the icon
flash.
• The pairing time might be longer for the first time pairing or pairing a new
Bluetooth device.
• Make sure you have the latest firmware for your Bluetooth mobile devices.
• Make sure your device is working properly. Check your device’s manual for details
on Bluetooth pairing and linking.
• Refer to manual of your cell phones, tablet PC, computer or other Bluetooth
enabled device for Bluetooth operation since it may vary from model to model.
PLAYING FROM A BLUETOOTH DEVICE
You can play music from your Bluetooth device wirelessly to SMPS-628 after pairing.
1. Selecting your favorite song, press the PLAY button on your Bluetooth device or
the
BUTTON (#11) on SMPS-628 to play or pause the Bluetooth
device playback.
2. Adjust both the VOL + / VOL – BUTTONS (#10/#9) of the SMPS-628 and your
Bluetooth device until you reach a comfortable listening level.
Notes:
1.) Your Bluetooth enabled device will not play the music through the speaker,
even if connected (linked), if the device does not support A2DP profile.
2.) Remember to turn off the SMPS-628 when you have finished listening.
3.) Don't forget to switch off the power of your external audio device as well