User's Manual

E-5

ALSM700 TRANSMITTER

The ALSM700 Transmitter operates using the supplied AC Adapter (Operate at

120V ~ 60Hz)

POWERING THE TRANSMITTER

NOTE: Only use the supplied adapter

1. Insert the DC plug of the AC adaptor provided into the DC 5V jack (#2) on the back

panel of the transmitter.

2. Plug the other end into an AC wall socket.

ARNING : Before connecting to the power supply, ensure that the supply

corresponds to the information on the rating label at the back of the apparatus.

3. Press POWER SWITCH (#5) on the power indicator (#6) will show power is getting

to the system.

4. The transmitter’s “signal” indicator (#7) will illuminate to confirm that the transmitter

is broadcasting.

5. Press CHANNEL button (#9) on the front panel to select transmitted channel both

channel indicator will light up.

SETTING UP THE TRANSMITTER

The 1/4” LINE IN jack (#1) enables you to connect directly from an audio source such

as a tape player.

MICROPHONE INPUT the 1/4” jack (#3) on the back of the transmitter is designed to

accept either dynamic or electret microphones.