MODEL NO.
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read Instructions - All the safety and operating instruction should be read before the product is operated. 2. Retain Instructions - The safety and operating instruction should be retained for future reference. 3. Heed Warnings - All warning on the product and in the operating instructions should be adhered to. 4. Follow instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning.
LOCATION OF CONTROLS 3 2 1 4 5 6 7 9 10 1. Stereo Speaker 2. Charge Indicator 3. Pairing Indicator 4. Power Button 5. Pair Button 6. Play/Pause Button 7. Volume Down Button 8. Volume Up Button 9. AUX IN Jack 10.
PRODUCT FEATURES The MW546 is a Bluetooth portable stereo speaker with the following features: • Auxiliary input jack to play music from your iPod or digital audio player • Wireless playback of music from your cell phone via the Bluetooth connection • Up to 33 feet (10 meters) operating range • Digital volume control PREPARATION FOR USE ACCESSORIES Unpack the unit carefully to remove all the accessories from the packing. Verify that the following accessories are present before setting up the unit.
. After prolonged use, the battery voltage may discharge and operation might become intermittent. When this happens, please recharge the internal battery. LOW BATTERY INDICATION 1. When operating the unit on battery power, the Red charging LED will flash indicating that the battery is low, please connect the unit to USB power for charging. 2. After prolonged use, the battery voltage will discharge and operation might become intermittent. When this happens, please recharge the internal battery. Note: 1.
PAIRING A BLUETOOTH DEVICE 1. Power on the unit by pressing the Power button. 2. Press and hold the Pair button to begin pairing. The Pairing indicator will begin flashing quickly. When pairing, remain within 3 feet of the unit. 3. Using the controls on your Bluetooth device, scan for and select “MW546” in your Bluetooth setting to pair.
TROUBLESHOOTING GUIDE Symptom No Charging No Sound Possible Problem The USB power adaptor (not included) is not plugged into a wall outlet or the USB cable (included) is not plugged into the micro USB jack on the MW546 Wall outlet is not functioning. Computer USB port is not functioning. Speaker batteries are dead Bluetooth speaker is not linked with the cell phone Speaker placement out of range Volume set too low Volume level is set too high. Sound is distorted.