All-in-one Turntable with Bluetooth, Radio & Stereo Speakers User’s Guide for Model ITTB775B For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.
Important Safety Instructions Important Safety Instructions • • • • • • • • • • • • • • 2 Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warnings and Precautions FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Introduction & Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������5 Features Power Includes Orientation ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������6 Main Features Rear Inputs Controls Operation �������������������������
Introduction & Setup Features Includes • • • • • • • • • • • 8 inch, 3 speed turntable plays 33 1/3, 78, and 45 rpm records Supports Bluetooth Wireless range: 60 feet Built-in FM radio with up to 20 memory presets Aux In 3.
Orientation Main Features 45 rpm Record Adapter Display & Controls Turntable MEM Tone Arm Lift Switch PAIR LIGHTS TUN FM PHONO AUX Tone Arm Lock Tone Arm & Stylus TUN BT F U N C TI O N STER VOLUME MA MIN Speakers Auto Stop Select ON or OFF. Record Speed Choose 33, 45, or 78, depending on the type of record to be played. 6 M Master Volume Function Turn dial to switch between different function modes.
Rear Inputs Dust Cover R L AUX IN DC IN AUX OUT DC Power Input Aux In Audio Output Connect to send audio signal to an external source. Controls Power Press to power the unit ON or OFF. Lights Press to activate LED light effects. Mem Press to begin programming FM memory presets. Skip Rev/Tun Press to skip back an audio track. In FM Mode, press to adjust down for FM tuning. M+/Play/Pause/Pair Press to cycle FM Memory Presets. Press to play/pause an audio track.
Operation Playing a Record It is recommended that you use extreme care when manipulating the tone arm, stylus, and other components of this turntable. These parts are very sensitive and can easily break or become damaged if they are carelessly handled. 1. Set the Source Dial to Phono. 2. Lift open the turntable dust cover, remove the shroud that protects the stylus, and release the lock that holds the Tone Arm in place in it’s resting position. Lock 3.
4. Use the Tone Arm Lift Switch to raise the Tone Arm from its catch. 5. Using your hand, gently swing the Tone Arm into the desired location over the record. The turntable will start spinning as the Tone Arm is moved into position. 6. Use the Tone Arm Lift Switch to safely lower the stylus onto the record. Using the Lift Switch instead of your hand will reduce the chance of accidentally damaging the record or the stylus. 7. Slide the Auto Stop Switch to ON to enable the Auto Stop feature.
Connecting Devices to the Turntable Pairing a Bluetooth Device 1. Set the Function Dial to BT and press and hold the Play/Pause/Pair button. The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit. 2. Using the controls on your Bluetooth device, search for and select ITTB775 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 .
Connecting to External Systems RCA Audio Output Requires RCA audio cables (red/white, not included). Use to connect the turntable to an external stereo, television, or other source. 1. Connect RCA audio cables to the RCA Audio Output on the back of the turntable, and to the audio input of an external stereo system. 2. Adjust the external stereo system to accept input from the turntable. 3. Audio played through the turntable will now be heard through the connected stereo system.
Company Information Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Warranty For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
