User's Manual

•Picture

1. Press the M+/CH+ or M-/CH- buttons on Main unit or Remote control to

select Config Menu, then press OK button to enter the following sub

menus.

2. Press M+/CH+ or M-/CH-buttonson Main unit or Remote control select

Picture, then press OK button to enter the following sub menus and

press buttons on Remote control to adjust the value in the sub menu.

Aspect Ratio : The LED screen will display the picture in 16:9 Wide

screen(Default) /AUTO/ 16:9 Pillar Box / 16:9 Pan

& Scan / 4:3 Letter Box / 4:3 Pan & Scan / 4:3 Full

ratio leaving a black border to either side of the

picture.

TV Format :NTSC

type.

(Default) / PAL TV operating system to suit the playback

•Caption

1. Press the M+/CH+ or M-/CH- buttons on Main unit or Remote control to

select Caption, then press OK button to enter the following sub menus.

2. Press M+/CH+ or M-/CH-buttonson Main unit or Remote control select CC

Display, then press OK button to enter the following sub menus and

press buttons on Remote control to adjust the value in the sub menu.

2. Press M+/CH+ or M-/CH-buttonson Main unit or Remote control select

Auto Search to scan your available channels and auto saving.