Installation & Assembly

Modern Forms
www.modernforms.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. AUGUST, 2015 2
PREPARATION
1.
2. y out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
CONNECTING THE WIRES (Fig. 2)
3.
es as shown in Fig. 2, making sure all wire connector(A1) are secured. If your outlet box has a green
plate using the green screw provided. After all wires are connected, tuck them carefully inside the junction box.
MOUNTING THE FIXTURE (Fig. 1)
4. Secure mounting plate to the junction box using junction box screws (B1).
The side of the mounting plate marked “GND” must face out.
5. Place the canopy over the mounting plate and secure with screws.
6. Twist lock the glass into the canopy, then lock it with
allen screw (C1) using allen wench (D1).
FIG.1
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring
A1
C1
D1
B1
Junction Box
Connectors
Mounting Plate
Canopy
Allen Screw
Allen Wrench
Glass
Screw
Junction Box Screw
White Fixture Wire
INSTALLATION INSTRUCTION
Circa - LED Flush Mount
FM-2109/FM-2111/FM-2115