Installation Guide

17FH-W1802
13. WALL CONTROL OPERATING INSTRUCTIONS
Your DC brushless motor is equipped with an intuitive wall control.
Restore power to ceiling fan and test the wall control as below for proper operation.
Button: turn the light ON or OFF
Press/Hold to increase the desired light level.
Press/Hold to decrease the desired light level.
Button: turn the fan ON or OFF
Press/Hold the button to increase the fan speed through
the speed settings.
Press/Hold the button to decrease the fan speed through
the speed settings.
Button: Switch between summer mode and winter mode.
Pairing the Wall Control to Your Fan
Your fan is pre-paired at the factory, NO pairing is necessary.
Wall Control Button Denitions
These seven buttons are used to set the fan speed as follows:
ON-OFF Switch: Pull switch tab to power o in case of emergency. Not necessary for normal fan operation.
FIGURE 18
ON-OFF
switch