Installation Sheet

FH-W2203
Corona Instructions12
2. Installing the Mounting Bracket
Remember to disconnect the power at the circuit breaker.
1. Attach the mounting bracket to the outlet box with the screws
provided with your outlet box. (Fig. 2)
2. Pass supply wires through mounting bracket and
secure to outlet box.
1. Place blades on the motor housing and align the blade holes with
the holes on the motor housing. You may want to set the fan on
the Styrofoam included with the package for easier installation.
(Fig 3).
2. Secure blades with blade attachment screws and washers. Use
Part B. (Fig. 3).
1. Screw the blade collector ring into the blade holes to secure the
blades. Use Part C. (Fig. 4).
3. Attaching the Fan Blade
4: Attaching the Blade Collector Ring