Installation Guide

FR-W1805
Hydra Instructions 33
What is Pairing?
Pairing is the process of connecting your Modern Forms remote or
wall control to your fan. Your fan comes pre-paired to your included
remote control. However, if you want additional controls for your
fan or if you’re replacing a control, refer to the pairing and unpairing
section of the instructions.
What is a Factory Reset?
Factory Reset is a restore of the fans original settings. This can
be achieved from the control or by pressing and holding the small
button on the receiver until you hear three audible beeps or by
holding down the fan toggle, light toggle, and season toggle buttons
on your paired remote or wall control for 10 seconds.
NOTE: You will need to re-pair your remote or wall controls to the
fan following a factory reset. A factory reset will also disconnect the
fan from your home Wi-Fi network and will require you to add the fan
using the Modern Forms Smart Fans app.
Please refer to the FAQ section of our app for further guidance.
For all other questions, please contact our dedicated Fan Support
specialists. Contact information can be found at the front of the
instructions.