Installation Guide

11FR-W1805

UL/cUL Listed

outlet box

120V Wires

Mounting neck

screws

Mounting

bracket

Mounting

bracket

Safety

cable

Stop valve

Stop Bracket

screws

Mounting screws

(supplied with

outlet box)

FIGURE 11

FIGURE 12

6. HANGING THE FAN (cont.)

1. Pass the 120-volt supply wires through the center hole in the

ceiling mounting bracket as shown in Fig. 11.

2. Secure the mounting bracket to the ceiling outlet box with the

screws and washers provided with your outlet box. (Fig. 11)

3. Attach mounting neck onto the mounting bracket. Rotate the

mounting neck to align the four screw holes. Secure mounting

neck to the mounting bracket with four mounting neck screws to

become a complete mounting bracket. (Fig. 11)

4. Carefully lift the fan motor assembly up to the mounting bracket

and seat the hanger ball in the mounting bracket. Rotate the

socket assembly until the ball drops and locks into the hanger

bracket screw. (Fig. 12)

5. Secure the safety cable to the building structure using a wood

screw (not included). (Fig. 12)

6. Secure the stop valve onto mounting bracket by tightening two

stop valve screw to close up the opening of mounting bracket.

(Fig. 12)