Instructions / Assembly

FR-W1811
Aviator Instructions20
8. Installing the LED Luminaire Module (Optional)
WARNING: Before starting installation, disconnect the power
by turning o the circuit breaker or removing the fuse at fuse box.
LED Luminaire Installation
(F-1811-5-LED) Sold separately
1. Unthread and remove the decorative lower cap from the
motor assembly.
2. Remove the 3 screws from the wire housing lower cover and
keep them for use with the light kit adapter plate. Remove the
wire housing lower cover.
3. Install the light kit adapter plate to the mounting ring using the
3 screws previously removed.
4. Raise and hold the LED luminaire module close to the adapter plate
and proceed to secure the wire connections. Connect the white wire
connector from the LED luminaire module to the white wire of the fan.
Follow the same procedure with the black wire connectors.
5. Tuck connections neatly into adapter plate. Using the 3 screws
provided, install the LED luminaire module to the adapter plate.
(Fig. 8B).
6. Raise glass shade up against the luminaire module, and
secure it to fan by turning glass shade clockwise until snug.
Do not overtighten (Fig. 8C)