O RB 6 2 ” & 8 2 ” FR-W18 1 6 - 6 2 L ; 8 2 L s INSTALLATION INSTRUCTIONS WET DC MOTOR SMART works with the Google Assistant modernforms.
All Modern Forms Smart Fans are: WET SMART Durably finished and Rated for interior and exterior use Able to coordinate with smart devices for voice-activated and thermostat control Wet location-listed to the strictest ETL/cETL safety regulations DC MOTOR Quiet, reliable, and up to 70% more efficient than AC fans Wi-Fi and RF enabled for unlimited control APP INSTRUCTIONS AND SMART HOME DEVICE INTEGRATION modernforms.
TABLE OF CONTENTS 1. SAFETY RULES..............................................................................................................................................4 2. FTC ENERGY GUIDE & SPECIFICATION.....................................................................................................5 3. TOOLS AND MATERIALS REQUIRED..........................................................................................................5 4. PACKAGE CONTENTS.....................................
1. SAFETY RULES For operation, maintenance, and troubleshooting information, visit modernforms.com/help. 1. 2. 3. 4. 5. 6. 7. 8. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. box and ungrounded conductor on the other side of the outlet box. 9. All set screws must be checked and re-tightened where necessary before installation.
2. FTC ENERGY GUIDE & SPECIFICATION FAN FAN SIZE VOLTS N.W. (lbs) G.W. (lbs) STANDARD ELECTRICITY AIR FLOW ENERGY COSTS* FAN EFFICACY Orb 62 62” 120 7.28 11.50 High Speed 44W 8123 CFM $12/yr 183.4 CFM/W 3.90 5.40 Weighted Average 24W 4875 CFM $7/yr 202 CFM/W STANDARD ELECTRICITY AIR FLOW ENERGY COSTS* FAN EFFICACY High Speed 48W 9064 CFM $13/yr 190.4 CFM/W Weighted Average 26W 5470 CFM $7/yr 211 CFM/W FAN FAN SIZE VOLTS N.W. (lbs) G.W.
4. PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: REF. DESCRIPTION PART NO.
4. PACKAGE CONTENTS (cont.) REF. DESCRIPTION K Hardware Bag PART NO. 3/16"x15mm Phillip Flat Head Screw (16) Φ4.7x14x2mm Rubber Washer (16) Φ6.5x19x2mm Flat Washer (1) RPL-ORB-PARTS 3/16"(Φ5.2x8.4x1.0mm) Spring Washer (1) #10x76mm Pan Head Phillip Wood Screws (1) 5/32"x19mm+S Phillip Truss Head Screw (Diameter 7.
5. MOUNTING OPTIONS Joist If there isn’t an existing UL/cUL listed mounting box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Secure the outlet box directly to the building structure. Use appropriate fasteners and building materials. The outlet box and its support must be able to fully support the moving weight of the fan (at least 35 lbs). Do not use plastic outlet boxes.
6. INSTALLING THE MOUNTING BRACKET REMEMBER to turn off the power. Follow the steps below to hang your fan properly: 1. Disconnect power at the breaker to the fan location. A licensed electrician must install the fan (Fig. 5). 2. FIGURE 5 Remove 1 of 2 screws from the bottom of mounting bracket and save for use in section 13. Loosen the other screw (Fig. 6). 3. Pass the 120-volt supply wires through the center hole in the ceiling mounting bracket as shown in (Fig. 7). 4.
7. ATTACHING THE FAN BLADES 1. Locate motor assembly and place it upside-down on a soft surface. 2. Insert the fan blade through the slot in the housing. Align the Screws with rubber washers Blade holes in the blade with the fan motor assembly holes and secure with a blade attachment screw with rubber washers (Fig. 8). 3. 8. INSTALLING THE LOWER HOUSING 1. Slot Repeat this procedure with the remaining fan blades.
9. INSTALLING THE LED LUMINAIRE MODULE FIGURE 10 15~20 WARNING: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at fuse box. NOTE: If you do not plan to install the luminaire module with your fan at this time, skip to section 14. FIGURE 11 1. Raise and hold the LED luminaire module close to the adapter plate and proceed to secure the wire connections.
10. HANGING THE FAN 1. Remove the clevis pin and cotter pin and loosen the two collar screws from the motor collar (Fig. 16). 2. Feed motor wires through coupling cover, canopy ring, and Downrod Assembly 14 canopy. 3. Feed motor wire through downrod assembly. 4. Thread the downrod assembly onto motor collar. Align the holes Canopy Cover Canopy Ring of downrod and collar and insert the cotter pin and clevis pin. Tighten the two collar screws (Fig. 16).
10. HANGING THE FAN (cont.) 1. Carefully lift the fan motor assembly up to the mounting bracket and seat the hanger ball in the mounting bracket socket. Make sure the tab on the mounting bracket socket is properly seated in the groove in the hanger ball. Rotate the socket assembly until the ball drops and locks into the hanger bracket screw (Fig. 17). 2. Secure the safety cable to the building structure using a spring washer, flat washer, and wood screw provided (Fig. 18).
11. MAKING THE ELECTRICAL CONNECTIONS WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. WARNING: Installation of this fan requires that a three-conductor Mounting bracket cable (including ground wire) be run between the ceiling and wall outlet box. WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts, except for the ground wire.
11. MAKING THE ELECTRICAL CONNECTIONS (cont.) Outlet box Motor to receiver electrical connections: (Fig. 20) 1. Connect the hanger ball/downrod assembly ground wire, mounting bracket ground wire and receiver ground wire to the White (neutral) Green (Ground) Black (hot) Black (“AC IN L”) White (“AC IN N”) ground wire in outlet box. Green (Ground) To hanger ball WARNING: Failure to connect ground wires could result in poor fan control functionality. 2. “TO MOTOR” from the receiver. 3.
12. INSTALLING THE WALL CONTROL WARNING: Remember to shut the power off at the circuit breaker or fuse box. Wall control to wall outlet box electrical connections: (Fig. 14) 1. Connect ground wires - Important for proper control function. 2. Connect the black wire marked “LINE IN” from the control to the black LINE VOLTAGE wire from the outlet box that feeds back to the breaker. 3. Connect the red wire from the control to the black wire from the wall outlet box that feeds up to the fan. 4.
12. INSTALLING THE WALL CONTROL (cont.) 1. Carefully tuck the wire connections inside the junction box. Wall control Secure the wall control with the two wall control mounting screws provided (Fig. 22). 2. Wall outlet box Wall mounting plate Attach the wall mounting plate over the wall control and secure with the two wall mounting plate screws provided. 3. Fasten the wall plate to the wall mounting plate. NOTE: A maximum of 2 fans can operate on a circuit through the wall control.
13. FINISHING THE INSTALLATION 1. Secure all wire connections with supplied wire ties to assist in canopy installation. 2. Tuck connections neatly into ceiling outlet box. 3. Slide the canopy up to the hanger bracket and place the key hole on the canopy over the screw on the hanger bracket. Turn canopy until it locks in place at the narrow section of the key holes (Fig. 23). 4. Align the circular hole on canopy with the remaining hole on the mounting bracket.
14. INSTALLING THE GLASS SHADE 1. Raise the glass up against the lower housing and secure by turning clockwise until snug. Do not over-tighten. 2. If installing the optional metal light cover, make sure it is securely tightened (Fig. 24). NOTE: Add metal light cover if you do not need lighting function or prefer a different aesthetic (Fig. 24). NOTE: Do not connect the LED connector wires if you are using the metal light cover.
15. WALL CONTROL OPERATING INSTRUCTIONS Your DC brushless motor is equipped with an intuitive wall control. Restore power to ceiling fan and test the wall control as below for proper operation. Pairing the Wall Control to Your Fan Your fan is pre-paired at the factory, No pairing is necessary. Wall Control Button Definitions These seven buttons are used to set the fan speed as follows: Button: turn the light ON or OFF Press/Hold to increase the desired light level.
15. WALL CONTROL OPERATING INSTRUCTIONS (cont.) NOTE: A maximum of 2 fans can operate on a circuit through the wall control. NOTE: A maximum of 12 fans can operate on a circuit through an on/off switch or breaker when utilizing the app for the fan control (without the wall control in the circuit). Summer Mode - (counter-clockwise) A downward airflow creates a cooling effect as shown in Fig. 26. This allows you to set your air conditioner on a warmer setting without affecting your comfort.
16. APPLICATION In addition to the included wall control, you can control the fan through the Modern Forms app. 1. To use the app, download it for free from the App Store or Google Play. 2. Open the app to create your account. You can also log in with your FIGURE 28 FIGURE 29 Facebook or Google account. 3. Next, set up a WiFi connection. You’ll need the SSID and WiFi password for the network you want to connect to. 4.
17. TROUBLESHOOTING Problem Solution Fan will not start. 1. Check circuit fuses or breakers. 2. Check wall control LED indicator light. If LED is not illuminated when pushing a button, it is not transmitting a signal. Please check power to wall control and all electrical connections. 3. Assure that there are no more than 2 fans operating on a circuit through the wall control.
18.
PRODUCT DOWNROD FR- W1 8 1 6 MODEL DESCRIPTION FINISH XF-12 12 in downrod AS, CFI, LN, SS BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-18 18 in downrod AS, CFI, LN, SS BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-24 24 in downrod AS, CFI, LN, SS BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-36 36 in downrod XF-48 48 in downrod AS, LN, SS BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-60 60 in downrod AS, LN, SS BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-72 72 in downrod AS, LN, SS BZ, DW, GB, GH, GW, MB, MW, OB, TT Al
Español For instructions in Spanish please visit the link below. Para obtener instrucciones en español, visite el siguiente enlace. www.modernforms.com/fan-instructions-espanol Français For instructions in French please visit the link below. Pour obtenir des instructions en français, veuillez visiter le lien ci-dessous. www.modernforms.
Get Smart The Modern Forms app synchronizes seamlessly with smart home devices you already own. To learn more go to modernforms.com/mfappins works with the Google Assistant Free App Download Sync with our exclusive Modern Forms App to control fan speed, use smart features like Adaptive Learning, create groups and reduce energy costs. modernforms.
FR- W 1 8 1 6 modernforms.
