Installation Guide

14FR-W1816
11. MAKING THE ELECTRICAL CONNECTIONS
Mounting
bracket
Receiver
WARNING: To avoid possible electrical shock, be sure electricity is turned o
at the main fuse box before wiring.
WARNING: Installation of this fan requires that a three-conductor
cable (including ground wire) be run between the ceiling and wall outlet box.
WARNING: Check to see that all connections are tight, including ground, and
that no bare wire is visible at the wire nuts, except for the ground wire.
Insert the receiver into the mounting bracket with the at side of the receiver
facing the ceiling (Fig 19).
Follow the steps on the next page to connect the fan to your household wiring.
Use the included plastic wire nuts with your fan. Secure the plastic wire nuts
with electrical tape. Make sure there are no loose strands or
connections.
FIGURE 19