Installation Guide

8 FR-W1910-52/62L

CAUTION: To prevent electrical shock, ensure electricity has been

turned o at the circuit breaker before beginning.

If there isn’t an existing UL/cUL listed outlet box, please refer to the

following instructions. Secure the outlet box directly to the building

structure. Use appropriate fasteners and building materials. The

outlet box and support structure must be able to fully support the

moving weight of the fan (at least 35 lbs/15.9 kg). Do not use plastic

outlet boxes. Use only UL/cUL listed outlet boxes marked

“FOR FAN SUPPORT.”

Secure the outlet box directly to the building structure.

Use appropriate fasteners and building materials. The outlet box

and its support must be able to fully support the moving weight

of the fan (at least 35 lbs). Do not use plastic outlet boxes.

Figures 1-4 are examples of dierent ways to mount the

outlet box.

NOTE: To hang your fan where there is an existing xture but no

ceiling joist, you may need an installation hanger bar.

NOTE: Downrod fans can be suspended up to a maximum

recommended length of 72” using additional downrods

(sold separately) and the included 80” lead wire.

NOTE: The sloped ceiling kit (sold separately) is required for sloped

ceiling applications, and will accommodate slopes up to 45° (FIG.3).

NOTE: You may need a longer downrod to maintain proper blade

clearance when installing on a steep, sloped ceiling (FIG. 3).

FIG. 1

Outlet Box

Provides Strong Support

Mounting Bracket

Recessed

Outlet Box

SLOPED CEILING

MAX 30° ANGLE

FIG. 2

FIG. 4

FIG. 3

Joist

Support

Brace

5. Mounting Options