Installation Guide

7
NOTE: ** denotes nish code of fan
A
G
H
I
L
D
M
J
K
B
E
F
REF. DESCRIPTION PART NO.
A Blade Set of 3 (3B1) RPL-F1916-56-BD-**
B Blade Holder Ring
---
C Hanger Assembly
RPL-HGR-ASM-**
Hanger Bracket
RPL-CAN-RND.**
Downrod Assembly RPL-COU-CVR
D Control Receiver w/Hardware RPL-F1916-56-REC
E Canopy w/ Canopy Screw Ring ---
F Coupling Cover ---
G Motor Assembly F4IN-120V-R1-30
H Adapter Plate ---
I LED Module ---
J Light Shade (Aluminum and glass)(1pc each) ---
K Upper Housing
---
L Wall Control w/Hardware
F-WC-WT
M Hardware Bag
4 x 9mm at Head Customed Philips Screw (7pcs) Blade Holder Ring
RPL-NIRVANA-PARTS
3/16 x 3/8 Flat Head Philip Screw (7pcs) Blade Screws
Ø5 x 14 x 1mm Flat Washer (7pcs) Blade Screws
Ø6.5 x 19 x 2mm Flat Washer (1pc) Safety Cable
3/16” (Ø5.2 x 8.4 x 1.0mm) Spring Washer (1pcs) Safety Cable
#10 x 76mm Pan Head Phillip Wood Screws (1pcs) Safety Cable
5/32” x 1/4mm Phil Truss Head Screw (Water Proof) (4pcs) For LED Module
C
4. Package Contents
Unpack your fan and check the contents. You should have the following items: