Installation Sheet

FR-W2001
Renegade Instructions 31
What Is Pairing?
Pairing is the process of connecting your Modern Forms remote
or wall control to your fan. Your fan comes pre-paired to your
included remote control. However, if you want additional controls
for your fan or if you’re replacing a control, refer to the pairing and
unpairing section of the instructions.
What Is a Factory Reset?
Factory Reset is a restore of the fans original settings. This can be
achieved from the control or by pressing and holding the small button
on the receiver until you hear three audible beeps or by holding down
the fan toggle, light toggle, and season toggle buttons on your paired
remote or wall control for 10 seconds.
NOTE: You will need to re-pair your remote or wall controls to the fan
following a factory reset. A factory reset will also disconnect the fan
from your home Wi-Fi network and will require you to add the fan
using the Modern Forms Smart Fans app.
Please refer to the FAQ section of our app for further
guidance. For all other questions, please contact our
dedicated Fan Support specialists. Contact information
can be found at the front of the instructions.