Installation & Assembly

2
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Modern Forms retains the right to modify the design of our products at any time as part of the company’s continuous improvement program.
PREPARATION
1. Shut o the power at the circuit breaker and remove
existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the
parts on a clear area. Be careful not to lose any small
parts necessary for installation.
MOUNTING THE FIXTURE (Fig. 1)
3. Remove the mounting screw (C) from the mounting
back plate.
4. Secure the mounting back plate to the junction box
using junction box screws (B). The side of the mounting
back plate marked “GND” must face out.
5. Place the rubber washer onto the mouth blown glass,
twist lock the glass onto the lamp body. Secure it using
Allen screw (E) and Allen wrench (D) provided.
CONNECTING THE WIRES (Fig. 2)
6. Connect the xture’s wires to junction box wires as
shown in Fig. 2, making sure that all wire connectors
(A) are secured. If your outlet box has a green or bare
copper ground wire, connect the xture’s ground wire to
it. Otherwise, connect the xture’s ground wire directly
to the back plate using the green screw provided. After
wires are connected, tuck them carefully inside the
junction box.
COMPLETING THE INSTALLATION (Fig. 1)
7. Secure the xture to the mounting back plate using the
mounting screw (C).
INSTALLATION INSTRUCTION
388 – LED Wall Sconce
WS-38817 / WS-38817F
G0
Fig.1 Mount on Switch Box
Mounting Backplate
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2 Wiring
Mouth Blown Glass
(RPL-GLA-38817)
Rubber Washer
Mounting
Backplate
Wire
Connector
Junction Box
Ground Wire
Junction
Box Screw
Mounting
Screw
Allen
Wrench
Allen
Screw
Lamp Body
F
A
BC
D
E
4
3
8
″
4
3
8
″
1
3
8
″
1
3
4
″
4 3/8”
1 3/8”
4 3/8”
1 3/4”