Assembly and Installation

11FH-W1803

7. MAKING THE ELECTRICAL CONNECTIONS (cont.)

Receiver

White (neutral)

Outlet Box

White (“AC IN N”)

Black (“AC IN L”)

Black (hot)

Trim Ring

Motor

Safety

Cable

Wood

Screw

Green (Ground)

from hanger ball

Green (Ground)

from hanger

bracket

Green (Ground)

from receiver

Receiver to house supply wires electrical connections:

(Fig. 9 &10)

1. Lift motor assembly and hang it on the hook of mounting bracket

using one of the screw holes. (Fig. 9)

2. Secure the safety cable to the building structure using a wood

screw (not included). (Fig. 9)

3. Connect the fan assembly ground wire, mounting bracket ground

wire and receiver ground wire to the ground wire in outlet box.

(Fig. 10)

WARNING: Failure to connect ground wires could result in poor

fan control functionality .

4. Connect the black (hot) wire from the ceiling to the black wire

marked “AC in L” from the receiver. (Fig. 10)

5. Connect the white (neutral) from the ceiling to the white wire

marked “AC in N” from the receiver. (Fig. 10)

FIGURE 9

FIGURE 10