Instructions / Assembly

www.modernforms.com

Modern Forms retains the right to modify the design of our products at any time as part of the company’s continuous improvement program.

XF-12/XF-I

INSTALLATION INSTRUCTIONS

TABLE OF CONTENTS

1. Safety Rules

2. Package Contents

3. Installation Instructions

1. SAFETY RULES

For operation, maintenance, and troubleshooting information, visit

modernforms.com/help.

2. PACKAGE CONTENTS

WARNING: All parts must be used as indicated in these

instructions. This product is designed for use only with the

supplied parts and/or accessories designated for use by Modern

Forms. Substitution of parts or accessories not designated for use

with this product by Modern Forms could result in personal injury

or property damage and will void the warranty. Contact an

authorized dealer or the manufacturer if any parts are damaged or

missing.

WARNING: To reduce the risk of fire, electric shock, personal injury

or damage to the fan or other items, mount the fan to a UL/cUL

listed outlet box marked “FOR FAN SUPPORT” with the screws

provided with the outlet box.

CAUTION: To prevent electrical shock, ensure electricity has been

turned off at the circuit breaker before beginning.

-Read all instructions before installing.

-All wiring must be in accordance with the National Electrical Code “ANSI/

NFPA 70” and local electrical codes. Electrical installation should be

performed by a licensed electrician.

-The outlet box and support structure must be securely mounted and

capable of reliably supporting a minimum of 50 lbs (22.7 kg). Use only UL/

cUL listed outlet boxes marked “FOR FAN SUPPORT OF 70 LBS OR LESS.” Use

only the screws and washers provided with the outlet box.

-The fan must be mounted with a minimum of 7 ft (2.1 m) clearance from the

trailing edge of the fan blades to the floor and a minimum of 1.5 ft (0.5 m)

from the edge of the fan blades to the surrounding walls.

-To avoid personal injury or damage to the fan and other items, please be

cautious when working around or cleaning the fan.

All set screws must be checked and re-tightened where necessary before

installation.

DOWNROD COUPLERS

DOWNRODS

12", 18", 24", 36", 48", 60", 72"*

*Carbon Fiber downrods available in 12", 18", 24" and 36"/ Koa downrods available in 12", 18", 24" and 48"

PAGE 1
X F- 12/XF-I INSTALLATION INSTRUCTIONS TABLE OF CONTENTS 1. 2. 3. WARNING: All parts must be used as indicated in these instructions. This product is designed for use only with the supplied parts and/or accessories designated for use by Modern Forms. Substitution of parts or accessories not designated for use with this product by Modern Forms could result in personal injury or property damage and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.
PAGE 2
X F- 12/ X F - I INSTALLATION INSTRUCTIONS 3. INSTALLATION INSTRUCTIONS SMART FAN DOWNROD CUTTING INSTRUCTIONS Remember to disconnect the power at the circuit breaker. In order to properly cut your downrod(s) please follow the instructions below. 1. Cut the non-threaded end of the downrod off to the desired length (Fig. 1). NOTE: We recommend using a band saw or a table saw to cut your downrods. 2. Drill a 5/16” diameter hole through both sides 7/16” from the end of the downrod (Fig. 2).
PAGE 3
X F- 12/ X F - I INSTALLATION INSTRUCTIONS ALTERNATIVE DOWNROD LENGHTS Remember to disconnect the power at the circuit breaker. To replace your fan’s existing downrod follow the instructions below. 1. Loosen the 2 set screws from the motor collar. Remove the cotter pin and clevis pin if installed into the motor collar. 2. Remove the hanger ball from the downrod assembly included with the fan by loosening the set screw and removing the cross pin. 3.