CR6252A Portfolio USB Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: • Turntable • 45 RPM adapter • Turntable Slip Mat • 3.5mm aux in cable • USB cable • Power adaptor Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. 2. 3. 4. 5. 6. 7. 8. 9. Pitch Control 10. On/Off-Volume Knob 11. Aux In Jack 12. Headphone Jack 13. USB Jack 14. RCA Jacks 15. Power Jack 16.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3. Place the slip mat on top of the turntable platter. 4. Connect AC adaptor to the Power Jack of the unit. Note: Do not plug the AC power adaptor to power outlet before all the assembly is completed. Before turning the power on, make sure again all the connection settings are correct.
English Turntable Operation 1. 2. 3. 4. Rotate the On/Off Volume Knob to turn on the power. Set the Speed Switch accordingly. Place the record on the turntable. Use the 45 RPM Adapter if necessary. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 5. Release the tonearm Hold Down Clip. Note: when the turntable is not in use, remember to lock back hold down clip. 6.
English Needle Replacement Removing Needle 1. Gently pull down the front edge of the needle. 2. Pull needle forward. 3. Pull out and remove. Installing Needle 1. Position the needle with its tip facing down. 2. Line up the back of the needle with the cartridge. 3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place.
English Bluetooth Operation 1. Press the Function Switch to Bluetooth mode , you will hear an activation sound from the unit. 2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY CR6252” and pair. 3. Once your device is successfully paired with the unit, you will hear a short confirmation sound from the unit. 4. Play and stream music from your device to the unit. Note: Bluetooth version - 4.2 Turntable Maintenance 1. Do not touch the stylus tip with your fingers.
English Troubleshooting There is no power • Power adaptor is not connected correctly. • No power at the power outlet. • To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, turn off the power and turn it on again. Power is on, but the platter does not turn • Turntable’s drive belt has slipped off.
English FCC Statements FCC Caution: 1. This device complies with Part 15 of the FCC rules/ Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3.
CR6252A Portfolio Tourne-disque USB Manuel d’utilisation Des questions, problèmes, pièces manquantes? Avant de retourner au magasin, appelez le service à la clientèle De 8 h à 18 h, HNE, du lundi au vendredi 1-888-CROSLEY www.crosleyradio.
Français Instructions de sécurité Veuillez lire et comprendre l'intégralité de ce manuel avant d'utiliser ce produit. Conservez ces instructions pour pouvoir les consulter ultérieurement. 1. Ne pas utiliser ce produit près de l’eau. 2. Ce produit doit être alimenté uniquement par le type de source d’alimentation indiqué sur l’étiquette ou dans le présent manuel d'utilisation. 3. Ne pas tenter de modifier le dispositif de sécurité que constitue la fiche polarisée.
Français Contenu de la trousse Avant de jeter les emballages, veuillez les passer en revue minutieusement et vérifier que vous avez les éléments suivants fournis dans cette trousse : • Tourne-disque • Adaptateur 45 tours • Tapis antidérapant du tourne-disque • Câble d'entrée auxiliaire de 3,5 mm • Câble USB • Adaptateur d’alimentation Veuillez contacter le service à la clientèle de Crosley s'il manque des accessoires dans la trousse.
Français Description du produit 1. 2. 3. 4. 5. 6. 7. 8. Plateau du tourne-disque Broche du tourne-disque Bras de lecture Commutateur d'arrêt automatique Sélecteur de vitesse Sélecteur de fonction Attache de retenue Support du bras de lecture 9. Variateur de vitesse 10. Bouton ON/OFF du volume 11. Prise d'entrée aux 12. Prise pour casque d’écoute 13. Prise USB 14. Prises RCA 15. Prise d'alimentation 16.
Français Configuration initiale Configuration de base 1. Placez l'appareil sur une surface plane. L'emplacement choisi doit être stable et sans vibration. 2. Retirez l'attache qui retient le bras de lecture. 3. Placez le tapis antidérapant sur le plateau du tourne-disque. 4. Branchez l'adaptateur c.a. à la prise d'alimentation de l'appareil. Remarque : Ne branchez pas l'adaptateur c.a. à la prise avant la fin du montage.
Français Utilisation du tourne-disque 1. 2. 3. 4. Tournez le bouton On/Off du volume pour mettre l'appareil sous tension. Réglez le sélecteur de vitesse en conséquence. Placez le disque sur le tourne-disque. Utilisez l'adaptateur 45 tours si besoin. Retirez la protection du stylet de son assemblage. Remarque : Pour éviter d'endommager le stylet, vérifiez que la protection intégrée du stylet est bien en place lorsque vous déplacez ou nettoyez le tourne-disque. 5.
Français Needle Replacement Removing Needle 1. Gently pull down the front edge of the needle. 2. Pull needle forward. 3. Pull out and remove. Installing Needle 1. Position the needle with its tip facing down. 2. Line up the back of the needle with the cartridge. 3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place.
Français Utilisation du Bluetooth 1. Mettez le Sélecteur de fonction sur le mode Bluetooth ; l'unité émettra un son d'activation. 2. Activez la fonction Bluetooth de votre appareil audio, recherchez « CROSLEY CR6252 » et associez l'appareil. 3. Une fois votre appareil associé à l'unité, celle-ci émettra un bref son de confirmation. 4. Lire et diffuser de la musique en continu de votre appareil sur l'unité. Remarque : Versions de Bluetooth – 4.2 Entretien du tourne-disque 1.
Français Dépannage L’appareil ne s’allume pas • L'adaptateur d’alimentation n’est pas branché correctement. • Aucune alimentation au niveau de la prise électrique. • Pour contribuer à économiser de l'énergie, certains modèles se conformeront à la norme d'économie d'énergie ERP (Energy-Related Products). En l'absence d'entrée audio pendant 20 minutes, l'alimentation se coupera automatiquement. Pour rétablir l’alimentation en courant et reprendre la lecture, éteignez l'appareil puis rallumez-le.
Français Déclarations relatives à la FCC Mise en garde FCC : 1. Cet appareil est en conformité avec la partie 15 des règles de la FCC / norme(s) CNR d'appareils radio exempts de licence d'Innovation, Sciences et Développement économique Canada. Son fonctionnement est assujetti aux deux conditions suivantes : (1) Cet appareil ne peut pas causer des interférences nuisibles, et (2) Cet appareil doit accepter toute interférence reçue, y compris celles susceptibles de causer un fonctionnement indésirable. 2.
CR6252A Portfolio Tocadiscos USB Manual de instrucciones ¿Tiene preguntas, ha tenido problemas o hay piezas faltantes? Antes de devolver el producto a la tienda, comuníquese con nuestro Servicio al Cliente de 8 a. m. a 6 p. m., hora del este, de lunes a viernes 1-888-CROSLEY www.crosleyradio.
Español Instrucciones de seguridad Lea y comprenda este manual en su totalidad antes de usar este producto. Conserve estas instrucciones para consultarlas en el futuro. 1. No use este producto cerca del agua. 2. Este producto debe ser utilizado solo con el tipo de fuente de alimentación indicado en la etiqueta o en este manual de instrucciones. 3. No subestime el propósito de seguridad del enchufe polarizado. Un enchufe polarizado posee dos hojas; una de ellas es más ancha que la otra.
Español Artículos en este empaque Antes de deshacerse de cualquier material del empaque, revíselo con atención y asegúrese de encontrar los siguientes artículos que se incluyen en este paquete: • Tocadiscos • Adaptador de 45 rpm • Cobertor deslizable del tocadiscos • Cable de entrada de 3.5 mm • Cable USB • Transformador Comuníquese con el Servicio al Cliente de Crosley en caso de que faltara algún accesorio en el empaque. Conserve el material de embalaje original para realizar cambios o devoluciones.
Español Descripción del producto 1. 2. 3. 4. 5. 6. 7. 8. Bandeja del tocadiscos Eje del tocadiscos Brazo del tocadiscos Interruptor de detención automática Interruptor de velocidad Interruptor de funciones Broche de sujeción Soporte del brazo del tocadiscos 9. Control de tono 10. Perilla de volumen Encendido/Apagado 11. Conector de entrada auxiliar 12. Conector de auriculares 13. Conector de USB 14. Conectores RCA 15. Conector de alimentación 16.
Español Instalación inicial Instalación indispensable 1. Coloque la unidad en una superficie plana y nivelada. El lugar seleccionado debe ser estable y estar libre de vibraciones. 2. Quite la banda de sujeción que sostiene el brazo del tocadiscos. 3. Conecte el adaptador de CA al conector de alimentación de la unidad. Nota: No enchufe el transformador de CA a un tomacorriente hasta terminar de ensamblar las partes.
Español Funcionamiento del tocadiscos 1. Gire la Perilla de volumen encendido/apagado para encenderlo. 2. Ajuste el Interruptor de velocidad según corresponda. 3. Coloque el disco en el tocadiscos. De ser necesario, utilice el Adaptador de 45 rpm. 4. Quite el protector de la aguja fonográfica de su ensamblaje. Nota: Para evitar los daños de la aguja fonográfica, asegúrese de que el protector esté ubicado correctamente cada vez que mueva o limpie el tocadiscos. 5.
Español Reemplazo de la aguja Quitar la aguja 1. Tire del borde delantero de la aguja con suavidad. 2. Tire la aguja hacia adelante. 3. Tire hacia fuera y quítela. Instalar la aguja 1. Coloque la aguja de manera tal que la punta quede hacia abajo. 2. Alinee la parte trasera de la aguja con la cápsula. 3. Introduzca la aguja con el extremo delantero en un ángulo descendente y suavemente levante la parte delantera de la aguja hacia arriba hasta que se trabe en su lugar.
Español audio del micrófono USB. Además, se recomienda configurarlo en el canal 2, 16 bit, 48000 Hz (calidad DVD) • Asegúrese de que la conexión USB esté hecha al conector USB de su computadora directamente en vez de a un concentrador USB para asegurar una conexión exitosa. Funcionamiento de Bluetooth 1. Coloque la perilla de funciones en modo Bluetooth . La unidad emitirá un sonido de activación. 2. Active la conexión de Bluetooth en el dispositivo de audio, busque “CROSLEY CR6252” y conéctelo. 3.
Español Solución de problemas La unidad no enciende. • El transformador no está conectado correctamente. • No hay energía en el tomacorriente. • Con el fin de ahorrar en el consumo de energía, algunos modelos cumplirán con el estándar de ahorro de energía ERP (productos relacionados con la energía). En el caso de que no se produzca la entrada de audio durante 20 minutos, estos equipos se desactivarán automáticamente.
Español Declaraciones de la FCC Precaución de la Comisión Federal de Comunicaciones (Federal Communications Commission, FCC): 1. Este dispositivo cumple con la Sección 15 de las reglas de la FCC/los estándares RSS exentos de licencia de la industria de Canadá.