Instructions / Assembly

Step-by-Step with Modern Masters
METAL EFFECTS
®
KIT | A Guide to a Green Patina Finish
| 2
PRIME IT
Metal Effects Primer can be applied to clean metal, wood, masonry, plaster and previously painted surfaces.
1. Stir well before use with the stir stick provided.
2. Apply 2 coats (wait approx. ½ hour between coats) of Metal Effects Primer with the chip brush supplied.
DO NOT THIN! Allow primer to dry (approx. 12 hours).
PAINT & OXIDIZE IT
3. Stir Oxidizing Copper Paint well before use with the stir stick provided. Apply rst coat with the chip
brush supplied and let dry (approx. 1/2 hour).
4. Apply second coat and while paint is still wet, spray on a light coat of Green Patina Aging Solution
over the entire surface. Do not saturate the surface as it will create pooling and over activate the nish.
If you do overspray, simply blot the area with a clean cotton rag.
5. As the activated surface dries (approx. 30-40 min.) a green patina nish will appear. Cold temperature
and/or humid conditions will prolong the oxidation process and dry time.
You are done!
21 3
4 5