How to Guide

TECHNICAL DATA
MDM-15
MODERN MASTERS
®
SATIN METALLIC PAINT
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙942∙3166
www.modernmasters.com
Form: ARJ-1823
Rev.: 022620
PHYSICAL PROPERTIES
SATIN METALLIC PAINT
Resin Type
Water-based Acrylic
Pigment Type
Varies with Color
Solvents
Water, Glycol Ethers
Weight
Per Gallon
9.04-11.38 lbs.
Per Liter
1.08-1.36 kg
Solids
By Weight
28.87-48.69 %
By Volume
23.15-34.59 %
Volatile Organic Compounds
50-267 g/l
Recommended Dry Film
Thickness (DFT) per Coat
1.5 mils
Wet Film to Achieve DFT
(Unthinned material)
4-6.5 mils
Practical Coverage at Recommended
DFT (assume 15% material loss)
208-320 sq.ft./gal.
Dry Times at 70-80°F
(21-27ºC) and 50%
Relative Humidity
Touch
30 minutes
Handle
1 hour
Recoat
30 minutes
Full Cure
24 hours
Shelf Life
5 years
Dry Heat Resistance
200°F
Flash Point
202-211°F
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.